Murray Foundation Pros
Sidewalk Lifting in Murray, UT
Sidewalk lifting in Murray UT fixes trip-hazard slabs fast with polyurethane foam, no replacement needed. Free estimates.
Serving Murray and nearby communities.
Uneven sidewalk panels are a liability most homeowners and property managers in Murray don't think about until someone trips on one. Murray Foundation Pros lifts sunken slabs back to grade with polyurethane foam injection rather than tearing out and repouring concrete, which keeps cost and downtime low. Freeze-thaw cycling along the Wasatch Front shifts soil under walkways every winter, so panels that sat flush last spring can drop a half inch or more by fall.
This is a precision job. Matching the height of an adjacent slab within a fraction of an inch is what actually removes the trip hazard, and that takes the right injection pressure and a trained eye, not guesswork.
What's included
What's included with Sidewalk Lifting
Typically included: slab height assessment, drilling access points, foam injection to raise the panel, height matching against adjoining slabs, hole patching.
Optional: joint resealing across the full walkway run, minor crack sealing on the lifted panel.
Customer prep: clear the walkway of planters, furniture, or stored items before the crew arrives.
Want a clearer scope?
Get a Free EstimateHow it works
How our Sidewalk Lifting process works
Step 1Sidewalk Inspection
Trip hazards and uneven slabs are identified along the walkway.
Step 2Access Hole Drilling
Small entry points are drilled into the affected slab sections.
Step 3Foam Injection
Material is injected to raise the sidewalk to a safe level.
Step 4Height Matching
Adjacent slabs are aligned to eliminate tripping hazards.
Step 5Hole Patching
Access points are sealed to restore a smooth surface.
Step 6Final Safety Check
The sidewalk is reviewed to confirm proper alignment and safety.
Materials
Materials and methods for Sidewalk Lifting
Each panel gets the same hydrophobic foam system we use on driveways and patios, sized down for smaller slab sections.
Polyurethane Foam
Raises sidewalk slabs quickly with minimal curing time, good for walkways that can't stay roped off for days.
Patch Mix
Fills the dime-sized access holes to restore a flush, walkable finish.
Joint Sealant
Reseals joints between slabs after lifting so water doesn't creep back under the panel and cause it to settle again.
Surface Protectant
Helps guard repaired areas from Utah's winter salt and freeze-thaw cycling.
Alignment Gauge
Used to measure slab height differences so the repair actually solves the trip hazard, not just the dip.
Bonding Primer
Improves patch material adhesion to original concrete so the patch doesn't pop loose later.
Questions on materials?
Get a Free EstimateTimeline
How long does sidewalk lifting take?
Most residential sidewalk sections are a same-day job, start to finish.
- 01
Inspection and marking
same visit
- 02
Drilling and injection
1–2 hoursper panel
- 03
Cure time before foot traffic
about 15 minutes
- 04
Final patch cure
same day
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits and codes for Sidewalk Lifting
Permit rules vary by jurisdiction. Confirm specifics with Salt Lake County or Murray City before scheduling work on a public-facing sidewalk.
| Typically needs a permit | Often no permit |
|---|---|
| Work on public right-of-way sidewalks fronting a Murray City street | Private walkway or backyard path lifting |
| Repairs tied into municipal sidewalk replacement programs | Patio-connected sidewalk sections on private property |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Sidewalk Lifting
| DIY | Hire a pro |
|---|---|
| Filling small surface cracks with concrete caulk | Any slab that's sunk enough to create a trip hazard |
| Sweeping and cleaning joints to slow future water intrusion | Panels near a property line or public right-of-way |
| — | Sections where water is pooling against the foundation or garage slab |
Not sure DIY vs pro?
Get a Free EstimateCost
What does sidewalk lifting cost in Murray?
Pricing depends on how many panels need lifting and how far they've settled. Call for a free estimate and we'll walk the sidewalk with you before quoting a number.
| Project type | Typical range | What’s included |
|---|---|---|
| Single panel lift | $300-$600 | one slab section raised and patched. |
| Multi-panel walkway | $800-$2,000 | several connected panels leveled in one visit. |
| Right-of-way sidewalk work | $600-$1,500 | includes any permit coordination with the city. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateWhen to call
When to call for Sidewalk Lifting
- A panel edge has become a visible trip hazard
- Water pools at a low spot instead of draining away
- A slab has cracked at the edge where it meets a neighboring panel
- You're getting ready to sell and want the walkway inspection-ready
Seeing warning signs?
Get a Free EstimateFAQs
Sidewalk Lifting FAQs
How much does sidewalk lifting cost in Murray?
Most single-panel jobs run $300-$600. Multi-panel walkways cost more depending on how many slabs need leveling.
How long does sidewalk lifting take?
A typical residential job is finished same day, including patch work. The foam cures enough for foot traffic within about 15 minutes of injection.
Do I need a permit for sidewalk lifting?
Private walkways usually don't need one. Public right-of-way sidewalks along a city street often do, check with Murray City before scheduling.
Is DIY sidewalk lifting a good idea?
Not for an actual trip hazard. Foam injection needs calibrated pressure to lift a slab evenly, and a surface patch alone won't fix the underlying dip.
Will sidewalk lifting damage my landscaping?
No. The access holes are dime-sized and the work stays within the slab footprint, so surrounding grass and plantings aren't disturbed.
Can sidewalk lifting fix a cracked panel too?
Minor surface cracks can be sealed during the same visit. A badly cracked or broken panel may need replacement instead of lifting.
What causes sidewalks to sink in Murray?
Freeze-thaw cycling and soil moisture shifts common along the Wasatch Front settle the base material under a slab unevenly over time.
Next step
Get a Sidewalk Lifting estimate in Murray
Trip hazards don't fix themselves. Call (385) 425-2489 or request a free estimate and we'll get your walkway level again.
More services
Other Foundation Repair services
Foundation Repair
Foundation repair in Murray with piering, crack injection, and wall support. Free written estimates, no pressure.
Piering and Underpinning
Steel push pier and helical pier underpinning in Murray, UT. Stop foundation settlement with engineered support and free written estimates.
Wall Stabilization
Basement wall stabilization in Murray, UT using steel anchors and carbon fiber straps to stop bowing walls. Free estimates, licensed and insured.
Ask about Sidewalk Lifting
Tell us about the project and how to reach you.