Murray Foundation Pros
Basement Waterproofing in Murray, UT
Basement waterproofing in Murray, UT with interior drain tile and sump pump systems. Stop spring snowmelt water intrusion. Free estimates.
Serving Murray and nearby communities.
Water coming into the basement after spring thaw is a drainage problem, not a crack problem. A crack injection seals one opening. Waterproofing manages the water before it ever reaches that opening.
Basement waterproofing installs interior drain tile, a sump pump system, and wall coatings so groundwater gets routed out instead of pushing through. Murray's full basements sit low enough to catch rising groundwater every spring, when snowmelt off the Wasatch Front saturates the valley floor and the water table climbs.
What's included
What's included with Basement Waterproofing
Typically included: moisture assessment, drainage evaluation, interior drain tile installation, sump pump setup, and wall sealing.
Optional: battery backup pump for power outage protection, vapor barrier sheeting for humidity control.
Customer prep: clear basement storage along perimeter walls and provide access to an electrical outlet near the planned sump location.
Want a clearer scope?
Get a Free EstimateHow it works
How our Basement Waterproofing process works
Step 1Moisture Assessment
Inspect the basement for leaks, dampness, and water entry points.
Step 2Drainage Evaluation
Review existing drainage for effectiveness and blockages.
Step 3Interior Drain Installation
Install a drain channel along the basement perimeter.
Step 4Sump Pump Setup
Install a pump system to remove collected water.
Step 5Wall Sealing
Treat walls with waterproof coating to block moisture.
Step 6System Testing
Test the full system to verify it functions properly.
Materials
Materials and methods for Basement Waterproofing
Interior Drain Tile
Channels water to a collection point before it reaches the basement floor.
Sump Pump System
Removes accumulated water, sized for the volume Murray basements see during snowmelt.
Waterproof Wall Coating
Creates a moisture barrier against basement walls facing hydrostatic pressure.
Vapor Barrier Sheeting
Cuts humidity transfer from soil into the basement space.
Check Valve
Stops discharged water from flowing back into the drain system.
Battery Backup Pump
Keeps the pump running during a power outage, common during heavy spring storms.
Questions on materials?
Get a Free EstimateTimeline
How long does basement waterproofing take?
- 01
Stage 1
Interior systems are typically a one to two day job.
- 02
Consult and inspection
same day - 03
Drain tile installation
1 day - 04
Sump pump install
same dayas drain tile
- 05
Wall sealing and testing
1 day
Need a schedule that fits?
Get a Free EstimateCost
What does basement waterproofing cost in Murray?
Cost depends on perimeter length and whether a sump pump is already in place. Exact pricing depends on how much of the perimeter needs drain tile. Ask for a free estimate and we'll walk the basement before quoting a number.
| Project type | Typical range | What’s included |
|---|---|---|
| Sump pump install only | $1,200–$2,800 | standard pump with discharge line. |
| Interior drain tile (partial perimeter) | $2,500–$6,000 | covers a wall section with active seepage. |
| Full interior drain system | $6,000–$12,000 | perimeter drain tile plus sump pump and wall sealing. |
| Battery backup add-on | $600–$1,200 | keeps the pump running through a power outage. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and codes for Basement Waterproofing
Confirm specifics with Salt Lake County or Murray City before work starts.
| Typically needs a permit | Often no permit |
|---|---|
| Interior drain tile tied into a new or relocated sump discharge line | Moisture assessment and inspection visits |
| Any excavation along the foundation footing deeper than code threshold | Wall coating or sealant application with no structural change |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Basement Waterproofing
| DIY | Hire a pro |
|---|---|
| Clearing gutters and extending downspouts away from the foundation | Interior drain tile installation |
| Grading soil so it slopes away from the house | Sump pump sizing and discharge line tie-in |
| Watching for damp spots after a heavy snowmelt week | Wall sealing on walls under active hydrostatic pressure |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Basement Waterproofing
- Water showing up on the basement floor every spring
- A musty smell that gets worse after rain or snowmelt
- Efflorescence (white mineral residue) building up on basement walls
- A sump pump that's started running constantly, or one that's never been installed
Seeing warning signs?
Get a Free EstimateFAQs
Basement Waterproofing FAQs
How much does basement waterproofing cost in Murray?
A sump pump install alone runs $1,200-$2,800. A full interior drain system with sump pump typically runs $6,000-$12,000 depending on perimeter length.
How long does basement waterproofing take?
Most interior systems finish in one to two days, including drain tile, sump pump setup, and wall sealing.
Do I need a permit for a sump pump or drain tile?
Usually yes, especially when tying into a new discharge line or excavating along the footing. We handle the filing.
Will waterproofing stop a bowing wall?
No. Waterproofing manages water. A bowing wall needs wall anchors or carbon fiber reinforcement first, and waterproofing after, to keep water from undermining the repair.
What's the difference between crack injection and waterproofing?
Crack injection seals one specific opening. Waterproofing manages water across the whole wall and floor system so it never builds enough pressure to find a new one.
Before & after
Before and after Basement Waterproofing
Before 
After
Next step
Get a Basement Waterproofing estimate in Murray
Call (385) 425-2489 or request a free estimate. We'll check where your water is actually coming from before recommending a system.
More services
Other Foundation Repair services
Foundation Repair
Foundation repair in Murray with piering, crack injection, and wall support. Free written estimates, no pressure.
Piering and Underpinning
Steel push pier and helical pier underpinning in Murray, UT. Stop foundation settlement with engineered support and free written estimates.
Wall Stabilization
Basement wall stabilization in Murray, UT using steel anchors and carbon fiber straps to stop bowing walls. Free estimates, licensed and insured.
Ask about Basement Waterproofing
Tell us about the project and how to reach you.