Murray Foundation Pros
Foundation Crack Repair in Murray, UT
Foundation crack repair in Murray, UT with epoxy and polyurethane injection. Fast, sealed repairs with free estimates and local crews.
Serving Murray and nearby communities.
Is that crack in your basement wall serious, or just cosmetic? Foundation crack repair uses epoxy or polyurethane injection to seal cracks and stop water or structural movement at the source. Murray Foundation Pros checks crack width, direction, and activity before recommending which injection method fits, since a hairline settling crack and a widening stair-step crack need different answers.
Our basements here deal with freeze-thaw cycling every winter and hydrostatic pressure every spring, both of which tend to reopen cracks that only got surface patched.
What's included
What's included with Foundation Crack Repair
Typically included: crack inspection, surface cleaning, injection port setup, epoxy or polyurethane injection, and surface finishing.
Optional: protective topcoat for cosmetic finish, follow-up moisture check after a rain or snowmelt event.
Customer prep: clear storage or furniture away from the affected wall section before the crew arrives.
Want a clearer scope?
Get a Free EstimateHow it works
How our Foundation Crack Repair process works
Step 1Crack Inspection
Examine each crack to determine type, width, and likely cause.
Step 2Surface Cleaning
Remove debris and loose material from the crack area.
Step 3Injection Port Setup
Install ports along the crack for material delivery.
Step 4Sealant Injection
Inject epoxy or polyurethane to fill and bond the crack.
Step 5Surface Finishing
Remove excess material and smooth the surface.
Step 6Final Inspection
Confirm a watertight, stable seal before leaving the site.
Materials
Materials and methods for Foundation Crack Repair
Epoxy Injection Resin
Bonds structural cracks for added strength where the crack isn't actively leaking.
Polyurethane Foam Sealant
Expands to fill cracks and block water infiltration common after Murray's spring snowmelt.
Injection Ports
Allow controlled delivery of sealant the full depth of the crack cavity.
Surface Primer
Preps concrete for proper material adhesion before injection.
Masonry Patch Compound
Blends the finished repair into surrounding surface texture.
Protective Topcoat
Shields the repaired area from continued moisture exposure.
Questions on materials?
Get a Free EstimateTimeline
How long does foundation crack repair take?
- 01
Stage 1
Most single-crack jobs are quick, same-visit work.
- 02
Consult and crack assessment
same day - 03
Injection and sealing
2–4 hoursper crack
- 04
Cure time before load/moisture exposure
24 hours - 05
Follow-up check (if requested)
next visit scheduled as needed
Need a schedule that fits?
Get a Free EstimateCost
What does foundation crack repair cost in Murray?
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and codes for Foundation Crack Repair
Verify specifics with Salt Lake County or Murray City if your repair is paired with other structural work.
| Typically needs a permit | Often no permit |
|---|---|
| Crack repair combined with structural wall reinforcement work | Standard epoxy or polyurethane crack injection |
| — | Surface finishing and topcoat application |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Foundation Crack Repair
| DIY | Hire a pro |
|---|---|
| Sealing a hairline crack under 1/16 inch with no movement using basic caulk | Any crack wider than 1/8 inch or actively widening |
| Monitoring crack width with a pencil mark and date over a few months | Cracks with visible water coming through |
| Keeping gutters clear to reduce water load near the crack | Stair-step cracking patterns in block or brick |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Foundation Crack Repair
Call Murray Foundation Pros for a free estimate before a small crack turns into a water problem.
- Crack width over 1/8 inch or growing over a few months
- Water seeping through during or after snowmelt
- Stair-step pattern forming in block or brick walls
- Efflorescence (white mineral deposit) building up near a crack
Seeing warning signs?
Get a Free EstimateFAQs
Foundation Crack Repair FAQs
How much does foundation crack repair cost in Murray?
A single hairline crack typically runs $400-$650. Active leaking cracks needing polyurethane injection run $500-$1,200.
How long does crack injection take?
Most single cracks are sealed in 2-4 hours, with a 24-hour cure before full moisture exposure.
Do I need a permit for crack injection?
Usually not, unless it's paired with structural reinforcement work like wall anchors.
Can I fill a foundation crack myself?
Hairline cracks under 1/16 inch with no movement can often be caulked. Wider or leaking cracks need professional injection to seal the full depth.
What's the difference between epoxy and polyurethane injection?
Epoxy bonds structurally and works best on dry, non-leaking cracks. Polyurethane expands and seals against active water infiltration.
Is a diagonal crack serious?
Diagonal and stair-step cracks can signal settlement rather than simple cosmetic cracking. Worth an inspection before assuming it's minor.
How do I know if my crack needs injection or piering?
If the crack is tied to visible settlement or a sloping floor, piering addresses the cause. If it's isolated with no other movement signs, injection alone usually works.
Before & after
Before and after Foundation Crack Repair
Before 
After
Next step
Get a Foundation Crack Repair estimate in Murray
Call (385) 425-2489 or request a free estimate and we'll tell you straight whether your crack needs epoxy, polyurethane, or something more.
More services
Other Foundation Repair services
Foundation Repair
Foundation repair in Murray with piering, crack injection, and wall support. Free written estimates, no pressure.
Piering and Underpinning
Steel push pier and helical pier underpinning in Murray, UT. Stop foundation settlement with engineered support and free written estimates.
Wall Stabilization
Basement wall stabilization in Murray, UT using steel anchors and carbon fiber straps to stop bowing walls. Free estimates, licensed and insured.
Ask about Foundation Crack Repair
Tell us about the project and how to reach you.