Murray Foundation Pros
Piering and Underpinning in Murray, UT
Steel push pier and helical pier underpinning in Murray, UT. Stop foundation settlement with engineered support and free written estimates.
Serving Murray and nearby communities.
When a section of a Murray home starts sinking, caulk and paint won't stop it. Piering and underpinning transfers the building's load down to stable soil or bedrock using steel push piers or helical piers. It corrects settlement rather than masking it.
Murray Foundation Pros sees this most often in older homes along the valley floor, where decades of soil moisture swings have let footings shift under full basements.
What's included
What's included with Piering and Underpinning
Typically included: load assessment, access excavation, pier driving to stable strata, bracket installation, hydraulic leveling adjustment, and site restoration.
Optional: interior slab piering for sunken basement floors, documentation package for resale or insurance purposes.
Customer prep: clear a 3-4 foot work path around the affected foundation perimeter and move landscaping or storage items away from access points.
Want a clearer scope?
Get a Free EstimateHow it works
How our Piering and Underpinning process works
Step 1Load Assessment
Engineer reviews weight distribution to set pier spacing and count.
Step 2Access Excavation
Small excavation points open along the foundation perimeter.
Step 3Pier Driving
Piers driven or screwed down until they hit stable bearing strata.
Step 4Load Transfer
Brackets connect piers to the foundation to redistribute weight.
Step 5Leveling Adjustment
Hydraulic jacks carefully raise the foundation toward level.
Step 6Site Restoration
Excavated areas backfilled and compacted to match original grade.
Materials
Materials and methods for Piering and Underpinning
We size every system to the structure's actual load, not a one-size-fits-all pier.
Steel Push Piers
Deliver deep, reliable support for heavier structural loads common in full-basement homes.
Helical Piers
Torque-driven support suited to variable valley-floor soil conditions and lighter additions.
Underpinning Brackets
Connect piers securely to existing foundation footings for consistent load transfer.
Hydraulic Lift Systems
Achieve controlled, precise elevation changes during leveling.
Galvanized Coatings
Protect steel components from corrosion from seasonal soil moisture.
Compacted Fill Material
Stabilizes soil around newly installed piers after backfill.
Questions on materials?
Get a Free EstimateTimeline
How long does piering and underpinning take?
- 01
Stage 1
Most jobs run from a single day for a few piers to a week for whole-perimeter underpinning.
- 02
Consult and inspection
same day
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permit filing**: 1-2 weeks
Pier installation: 1-4 days depending on pier count Leveling and load transfer: part of install day Backfill and cleanup: same day as final pier set
Pier installation: 1-4 days depending on pier count Leveling and load transfer: part of install day Backfill and cleanup: same day as final pier set
Need help with permits?
Get a Free EstimateCost
What does piering and underpinning cost?
Pricing scales with pier count, depth to bearing soil, and access difficulty. Exact pricing depends on soil depth and access on your property. Ask for a free estimate and we'll walk the site before quoting.
| Project type | Typical range | What’s included |
|---|---|---|
| Spot repair (1-3 piers) | $1,000–$2,500 | per pier, for a localized settling corner. |
| Partial perimeter (4-8 piers) | $4,000–$18,000 | covers a sinking wall section. |
| Full perimeter underpinning | $15,000–$40,000+ | stabilizes the entire foundation. |
| Interior slab piers | $1,200–$2,800 | per pier, for sunken basement floor sections. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Piering and Underpinning
| DIY | Hire a pro |
|---|---|
| Monitoring crack width with a tape measure over time | Any pier driving or helical installation (structural load, not a homeowner task) |
| Noting which doors/windows stick and when | Bracket attachment to foundation footings |
| Basic yard grading away from the foundation to reduce moisture buildup | Hydraulic leveling adjustments |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Piering and Underpinning
Call Murray Foundation Pros for a free estimate before the settlement spreads further.
- Floors slope noticeably toward one corner of the house
- Stair-step cracks in brick or block keep widening over months
- Doors and windows that used to close fine now stick
- One section of the foundation sits visibly lower than the rest
Seeing warning signs?
Get a Free EstimateFAQs
Piering and Underpinning FAQs
How much does piering cost?
Spot repairs with a few piers typically run $1,000-$2,500 per pier. Full perimeter jobs can reach $15,000-$40,000 depending on pier count and depth to bearing soil.
How long does pier installation take?
A few piers can be done in a day. Full perimeter underpinning usually takes several days to a week depending on access and pier count.
Do I need a permit for underpinning?
Piering and underpinning is structural work and almost always requires a permit in Salt Lake County. We handle the filing.
Can I install piers myself?
No. Piers carry structural load and require engineering judgment on placement and depth. This isn't a DIY repair.
What's the difference between push piers and helical piers?
Push piers are driven using the structure's own weight as resistance, good for heavier homes. Helical piers are screwed in and work well for lighter loads or tighter access.
How do I know if I need piering versus crack injection?
If the crack is tied to visible settlement, sloping floors, or a sinking corner, piering addresses the cause. Crack injection alone won't stop ongoing movement.
Before & after
Before and after Piering and Underpinning
Before 
After
Next step
Get a Piering and Underpinning estimate in Murray
Call (385) 425-2489 or request a free estimate and we'll assess your settlement before recommending a pier count.
More services
Other Foundation Repair services
Foundation Repair
Foundation repair in Murray with piering, crack injection, and wall support. Free written estimates, no pressure.
Wall Stabilization
Basement wall stabilization in Murray, UT using steel anchors and carbon fiber straps to stop bowing walls. Free estimates, licensed and insured.
Foundation Crack Repair
Foundation crack repair in Murray, UT with epoxy and polyurethane injection. Fast, sealed repairs with free estimates and local crews.
Ask about Piering and Underpinning
Tell us about the project and how to reach you.