Murray Foundation Pros
French Drains in Murray, UT
French drain installation in Murray, UT to redirect groundwater away from your foundation before spring snowmelt causes basement seepage.
Serving Murray and nearby communities.
A french drain redirects surface and groundwater away from the foundation before it ever reaches the basement wall, which makes it the companion fix to interior waterproofing rather than a replacement for it. Murray Foundation Pros installs these along yard low points and foundation perimeters where spring snowmelt consistently pools against full basement walls.
This is an exterior prevention system. If water is already inside, pair it with interior drain tile or a sump pump.
What's included
What's included with French Drains
Typically included: drainage assessment, trench excavation, gravel base, perforated pipe installation, and backfill.
Optional: catch basin addition for surface water collection, outlet cap at the discharge point.
Customer prep: mark sprinkler lines and underground utilities in the yard area before the crew digs.
Want a clearer scope?
Get a Free EstimateHow it works
How our French Drains process works
Step 1Drainage Assessment
Study water flow patterns to determine the best drain path.
Step 2Trench Excavation
Dig a trench along the planned drainage route.
Step 3Gravel Base Placement
Add a gravel layer to promote proper water flow.
Step 4Pipe Installation
Place perforated piping to capture and redirect water.
Step 5Backfill and Cover
Fill the trench with gravel and soil to complete the system.
Step 6Outlet Testing
Test water flow to confirm proper drainage direction.
Materials
Materials and methods for French Drains
Perforated Drain Pipe
Collects and channels groundwater away from the foundation before it builds pressure.
Gravel Aggregate
Surrounds the pipe to keep water moving instead of pooling.
Filter Fabric
Keeps soil from clogging the pipe over repeated freeze-thaw cycles.
Outlet Cap
Directs discharged water safely away from the foundation.
Catch Basin
Collects surface water and channels it into the drain system.
Backfill Soil
Restores the trench area after pipe installation is complete.
Questions on materials?
Get a Free EstimateTimeline
How long does french drains take?
- 01
Stage 1
Standard residential runs are usually a single-day job.
- 02
Consult and site assessment
same day - 03
Trench excavation and pipe install
1 day - 04
Backfill and cleanup
same day
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits and codes for French Drains
Verify discharge point requirements with Salt Lake County or Murray City before digging.
| Typically needs a permit | Often no permit |
|---|---|
| Drainage tying into a city storm drain system | Standard yard-to-daylight french drain installation |
| — | Catch basin addition on private property |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for French Drains
| DIY | Hire a pro |
|---|---|
| Short surface swales redirecting water across flat yard areas | Proper grade calculation so water actually flows to the outlet |
| Clearing existing drain outlets of debris | Pipe sizing matched to the volume of water the site sheds |
| — | Tying into an existing drainage or storm system |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for French Drains
Call Murray Foundation Pros for a free estimate before that pooling finds its way inside.
- Standing water pooling near the foundation after rain or snowmelt
- Basement seepage tied to a specific yard low spot
- Water consistently collecting along one side of the house
Seeing warning signs?
Get a Free EstimateFAQs
French Drains FAQs
How much does a french drain cost in Murray?
A short yard run under 30 feet typically costs $800-$1,800. Standard foundation-perimeter runs range $1,800-$4,500.
How long does french drain installation take?
Most residential runs are completed in a single day, including trenching and backfill.
Do I need a permit for a french drain?
Standard yard-to-daylight drains usually don't require one. If you're tying into a city storm system, check with Murray City first.
Can I install a french drain myself?
Short surface swales are doable DIY. Getting the slope and pipe sizing right for a foundation-side drain is easy to get wrong without experience.
What's the difference between a french drain and a sump pump?
A french drain is exterior, intercepting water before it reaches the foundation. A sump pump is interior, removing water that's already made it inside.
Will a french drain stop basement seepage on its own?
It reduces the water load reaching your walls, but if seepage is already happening, pair it with interior waterproofing for full coverage.
Before & after
Before and after French Drains
Before 
After
Next step
Get a French Drains estimate in Murray
Call (385) 425-2489 or request a free estimate and we'll map out where your water needs to go.
More services
Other Foundation Repair services
Foundation Repair
Foundation repair in Murray with piering, crack injection, and wall support. Free written estimates, no pressure.
Piering and Underpinning
Steel push pier and helical pier underpinning in Murray, UT. Stop foundation settlement with engineered support and free written estimates.
Wall Stabilization
Basement wall stabilization in Murray, UT using steel anchors and carbon fiber straps to stop bowing walls. Free estimates, licensed and insured.
Ask about French Drains
Tell us about the project and how to reach you.